Print Page | Close Window

Chevy 2000 Silverado Ignition Unlock

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=64661
Printed Date: May 16, 2025 at 5:45 AM


Topic: Chevy 2000 Silverado Ignition Unlock

Posted By: eduardo826
Subject: Chevy 2000 Silverado Ignition Unlock
Date Posted: October 19, 2005 at 2:21 PM

Hello
Can any help me evey time I pull my key out of the ignition the doors unlook. How do I stop that, can just cut a wire or is it programing of the factory alarm. I installed a aps 996a the unlocking of the doors problem was there before I installed the alarm.I think.

2000 Chevy Siverado



Replies:

Posted By: mrchris
Date Posted: October 19, 2005 at 4:22 PM
you need to take it to a repair shop that has the master tech can tool and software capable of reprogramming th bcm,make sure you do not have a weak battery when you take your vehicle in,if your near the houston tx, area i have the equipment to do this email me with any other questions you may have mrchris@houston.rr.com

-------------
c.m.s


Print Page | Close Window