Print Page | Close Window

1n4005 Viper 791xv Chevy Silverado

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=64686
Printed Date: June 08, 2024 at 9:13 AM


Topic: 1n4005 Viper 791xv Chevy Silverado

Posted By: chrisandersen
Subject: 1n4005 Viper 791xv Chevy Silverado
Date Posted: October 19, 2005 at 9:10 PM

I have a 2003 Chevy Silverado and am installing a 791XV alarm.  I am using 1n4005 Diodes to isolate the L and R door triggers. 

However, with the diodes in place I am getting a door trigger alam about 10 seconds after arming.  This does not occur without the diodes in place isolating the 2 doors.  Any suggestions?

Thanks




Replies:

Posted By: chrisandersen
Date Posted: October 19, 2005 at 9:39 PM

I have just discovered that the falsing I am getting is from my 507t Tilt sensor.....It is also diode isolated...motion is disabled, and it falses as soon as it arms....any thoughts?




Posted By: Velocity Motors
Date Posted: October 19, 2005 at 10:06 PM
Which way is your diodes facing ?

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA



Posted By: chrisandersen
Date Posted: October 19, 2005 at 11:05 PM
diodes facing the correct direction...I am having trouble with the 507t sensor falsing when any of the dip switches are set for the motion sensor to be active as soon as it arms it goes off...sensor seems to work correctly when set only to detect tilt.  Any experience with these sensors being defective?


Print Page | Close Window