507t sensor falsing

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=64695
Printed Date: May 13, 2025 at 12:27 AM

Topic: 507t sensor falsing

Posted By: chrisandersen
Subject: 507t sensor falsing
Date Posted: October 19, 2005 at 10:20 PM

I am installing a new 507T tilt sensor on my 791XV alarm. Two questions....The sensor falses immediately after the 10 second arming sequence when any of the motion dipswitches are on.

When they are off the tilt function seems to work normally...although Iam only moving the module with my hand to test it and I am definately going way past 1 or 3 degrees before it finally triggers.

Any thoughts? Are these prone to being defective?

Replies:

Posted By: mrcllusb
Date Posted: October 20, 2005 at 3:56 AM

Try actually placing the sensor,and jacking the car up a lil,since ur hand is not a solid object..

-------------
"ole blake"

Print Page | Close Window