viper 350hv

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=64754
Printed Date: May 14, 2025 at 8:59 PM

Topic: viper 350hv

Posted By: vu-r4
Subject: viper 350hv
Date Posted: October 20, 2005 at 8:34 PM

Hi guys,

Got this alarm(viper 350HV) from my buddy a while back. Finally will use it on my 91 lexus ls400. But I don't have the main install guide for the alarm. The wire diagram is on the back but it doesn't specify a wire for the factory disarm. Does anyone have an idea how I can modify a relay or something to disarm it when i disarm this viper alarm?

Replies:

Posted By: swamprat323
Date Posted: October 20, 2005 at 8:43 PM

factory disram with unlock.

Posted By: vu-r4
Date Posted: October 20, 2005 at 8:45 PM

swamprat323 wrote:

factory disram with unlock.

Thanks for the fast reply, i'll be ready to put it in tomorrow. One more ? I don't have the led that originally came with the alarm would any other regular led light work?

Posted By: swamprat323
Date Posted: October 20, 2005 at 8:48 PM

https://www.directechs.com/guides/manuals/ig/viper/N426V_07-04.pdf

go down to a shop that sells DEI see if sell you one.

Posted By: ihookitup4u
Date Posted: October 21, 2005 at 3:31 AM

Yes any 2.2 volt led will work.

Print Page | Close Window