carvox alarm cant get it to autostart

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=64756
Printed Date: May 14, 2025 at 8:19 AM

Topic: carvox alarm cant get it to autostart

Posted By: vishal0587
Subject: carvox alarm cant get it to autostart
Date Posted: October 20, 2005 at 9:27 PM

i put the tech on the coil and it wont work

it keeps cranking the starter

can some 1 help me plz

Replies:

Posted By: thepencil
Date Posted: October 20, 2005 at 9:59 PM

What Year, Make, model of car do you have?

-------------
Be careful whose advice you buy, but be patient with those who supply it. posted_image

Posted By: vishal0587
Date Posted: October 20, 2005 at 10:05 PM

1991 nissan Maxima

Posted By: edith
Date Posted: October 21, 2005 at 5:43 AM

vishal0587 wrote:

i put the tech on the coil and it wont work
it keeps cranking the starter
can some 1 help me plz

hi...is that the remote starter you have

https://cgi.ebay.ca/dll?ViewItem&category=94832&item=5808451732

because i have the same problem?

Posted By: mo12v
Date Posted: October 21, 2005 at 8:39 AM

Check the PURPLE / White wire for programming

Also you may have a Cold Start wire
Cold Start Wire- GREEN/ RED Or BLACK/ GREEN At Ignition Switch Harness.

Tach Signal

GREEN/ BLACK/ SILVER

2ND OF 4 CONNECTORS AT ECCS, PIN 7 *

* Electronic Concentrated Control System (ECCS) Module Located Above Gas Pedal, Behind Console. Tach Wire Sometimes Found As BLUE At Pin #7 At ECCS

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.

Posted By: vishal0587
Date Posted: October 21, 2005 at 10:29 AM

i got it to work the Tech wire is 2 small it is picking up all the High-Voltage sensing what i did it work fine nowi put 8g wire form the coil run it to the main unit cut the tech wire 1f long form the main unit and join it to the 8g wire.

Posted By: edith
Date Posted: October 21, 2005 at 11:39 AM

vishal0587 wrote:

i got it to work the Tech wire is 2 small it is picking up all the High-Voltage sensing what i did it work fine nowi put 8g wire form the coil run it to the main unit cut the tech wire 1f long form the main unit and join it to the 8g wire.

hi is that work ok now?