Clifford arrow 5 trunk not working?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=64843
Printed Date: July 26, 2025 at 7:34 AM

Topic: Clifford arrow 5 trunk not working?

Posted By: Jay22
Subject: Clifford arrow 5 trunk not working?
Date Posted: October 22, 2005 at 6:10 PM

Well I hooked my Clifford Arrow 5 up to my 95 Chrysler LHS and the trunk pop isnt working...not a big concern but would be nice to use.....I hooked it to the black and white wire off my trunk pop and nothing???Is there a certian way i should hook it up by using a relay or something??

Jay

Replies:

Posted By: mo12v
Date Posted: October 22, 2005 at 6:15 PM

Did you Hold Down On Remote Button for apprx 3 - 5 seconds?

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.

Posted By: Jay22
Date Posted: October 22, 2005 at 6:28 PM

ahh never did that lol brb i shall try that lol

Jay

Posted By: Jay22
Date Posted: October 22, 2005 at 6:31 PM

Nope no work with alarm armed and not armed?

Strange

Jay

Posted By: Jay22
Date Posted: October 22, 2005 at 6:43 PM

I just read up that there shoud be a relay on it..
Would it be like this

PIN 87 =BLACK/ white trunk release wire
PIN 87a = XX
PIN 30 = Constant 12 volt ( + ) : pink/black or red (20A)
PIN 85 = + acc from clifford alarm
PIN 86 = Constant 12 volt ( + )

Posted By: mo12v
Date Posted: October 22, 2005 at 6:49 PM

Your wiring showed the Clifford has a Positive Pulse from the # 16 RED / white- (+) acc output ?? If that is true you need to GROUND PIN 86

Better Meter it to make sure......Also that will tell you how long you have to hold Button down

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.

Posted By: Jay22
Date Posted: October 22, 2005 at 6:56 PM

yep it s +(acc) so all that wiring to a relay but ground pin 86.....Thanks again for ur input!

Jay

Posted By: mo12v
Date Posted: October 22, 2005 at 7:07 PM

Check page 10 of your instructions........
It shows wiring of Relay and the RED / white wire as a NEGATIVE pulse

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.

Posted By: Jay22
Date Posted: October 22, 2005 at 7:25 PM

yep i dont have the instructions for it lol...i bought it off my buddy.

Jay

Posted By: mo12v
Date Posted: October 22, 2005 at 7:57 PM

Try:

https://www.directechs.com/guides/manuals/ig/clifford/N909595_08-04.pdf

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.