nitro bmw 2-way alarm install
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=64869
Printed Date: July 05, 2025 at 1:55 PM
Topic: nitro bmw 2-way alarm install
Posted By: chrisati
Subject: nitro bmw 2-way alarm install
Date Posted: October 23, 2005 at 1:49 AM
I just bought a nitro bmw 2-way LCD Paging & Remote start car alarm and i need some help. In the wiring diagram included with kit it says something about hooking up a air conditioner wire and a keyhole on wire?? well im pretty sure the keyhole on wire shows + with key in on position but what about the a/c wire? Has anyone every installed one of these alarms???
-------------
CsC
Replies:
Posted By: chriswallace187
Date Posted: October 23, 2005 at 5:27 AM
What's the make and model of this alarm, where'd you get it from, and what type of vehicle is it going into?
-------------
C Renner's Auto Electronix
My service is cheap, quick, and good - pick any two
Posted By: chrisati
Date Posted: October 24, 2005 at 12:47 AM
I guess its made by Nitro and the make is BMW-2-WAY. On the users manual it says ISO9001 at the bottom left corner. Its a 2-way FM car alarm with LCD status display. I bought it off E-bay, its called sonicelectrnix.com. Its going in an 03' Civic LX. I already installed an alarm in it with the same options as the one I want to put in, but the LCD remote started messing up. ------------- CsC
Posted By: Velocity Motors
Date Posted: October 24, 2005 at 8:58 AM
chrisati wrote:
I just bought a nitro bmw 2-way LCD Paging & Remote start car alarm and i need some help. In the wiring diagram included with kit it says something about hooking up a air conditioner wire and a keyhole on wire?? well im pretty sure the keyhole on wire shows + with key in on position but what about the a/c wire? Has anyone every installed one of these alarms???
The A/C wire will be your ACCESSORY wire for the Honda ( BLACK/ RED ) and then you also have a 2nd ACC wire ( WHITE/ RED ) that you will need to power up. If you don't have a designate 2nd ACC wire then you will need this diagram: https://www.velocitymotorsport.com/images/install_notes/2nd_accessory_relay.jpg ------------- Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: chrisati
Date Posted: October 24, 2005 at 5:35 PM
well the a/c wire I was refering to is the air conditioner wire. By the looks of it, it seems that both the air conditioner wire and keyhole on wire are pretty much the same wire so it might just be an accesory wire. I know that sounds weird but thats what it says in the installation manual. i have pics of the alarm itself if anyone would like to see it or you can go to sonicelectrnix.com and look at it.
-------------
CsC
Posted By: sneakycyber
Date Posted: October 25, 2005 at 12:30 PM
The airconditioning wire they are referring to is a second Accessory wire just like velocity said (Black with red ).. It just means if you dont hook up this wire the a/c system wont work. So you need both accessory wires (black with red and White with red) connected for the unit to work properly. The keyhole wire they stated is the Ignition 1 wire ( I am assuming ) this wire will test positive in the run and crank and off in the accessory position. Hope this helps.
-------------
Posted By: chrisati
Date Posted: October 25, 2005 at 2:05 PM
Well thats what I figured it would be, but in the manual and on the harness the wires are both green and are the same wire. So now what?
-------------
CsC
|