Print Page | Close Window

chevy equinox remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=64982
Printed Date: May 13, 2025 at 4:04 AM


Topic: chevy equinox remote start

Posted By: rfd614
Subject: chevy equinox remote start
Date Posted: October 25, 2005 at 12:16 PM

I am getting ready to install a design tech remote start on a 2005 equinox. I have the PLXR, and the universal bypass module. Does anyone have experience with these design tech remote starts and equinox's? I called the tech service line and they told me that they have never done a chevy equinox so they have no support to lend me.  thank you for any assistance.

-------------
HOLLYWOOD,RFD614



Replies:

Posted By: sneakycyber
Date Posted: October 25, 2005 at 12:42 PM
These are easy to do.. All the wires for brake,lights,locks, keysense and passlock are located at the BCM under the radio. The big difference is there is no starter wire. The car will start when the 2 accessory wires drop out and the bypass module kick in.. Be sure to connect the keysense wire or the car will not start.

-------------



Posted By: sneakycyber
Date Posted: October 25, 2005 at 12:53 PM

24 pin gray plug A3 Dk blue unlock, b3 light blue parking lights, keysense light green

24 pin pink plug B4 light blue lock,

16 pin gray plug:  A8 yellow passlock data, B8 black w/orange passlock ground

EDIT: The parking brake wire is at the brake pedal its the light blue wire



-------------


Print Page | Close Window