507 T Dip Switch Adjustment
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=64987
Printed Date: May 16, 2024 at 3:08 PM
Topic: 507 T Dip Switch Adjustment
Posted By: salaki
Subject: 507 T Dip Switch Adjustment
Date Posted: October 25, 2005 at 2:04 PM
What's w/ DEI's install / adjust instruction manual?
I just received my 507T Motion/Tilt Sensor.
On the sensor itself (bottom on the table w/ the mounting hole on the table):
ON means - Dipswitch DOWN to the bottom.
BUT on the instruction manual:
Deep switch UP - away from the bottom is ON?
Which one is correct?
I know I could try it myself later on but I'm curious here at work trying to find out which one is the right way.. Instruction or the sensor itself.
Thanks,
David
Replies:
Posted By: salaki
Date Posted: October 25, 2005 at 2:10 PM
Never mind... Big Dog posted it before:
Try 3 degrees and medium motion . ..
Don't forget that when facing the dipswitches, to flip dipswitch ON it must be in the DOWN position (opposite of a light switch in your home). . .
So when dipswitch 1 is closer to PCBoard, the position is 1 degree, whereas away from PCBoard is 3 degrees. Same goes for other settings.
|