matt search through the different posts. search for ht455 and you should get some results like i did. I've managed to install mine just need info on programming it
-------------
To err is human....
Black ----- Chassis Ground
Red ----- 12V+
White ----- Hazard/parking Lights (O/P + 5 A)
White ----- Hazard/parking Lights (O/P + 5 A)
BLACK/ White ----- Interior Light (O/P -500mA)
White / Blue ----- Ignition Coil
Green / Black ----- Close Electric Windows (O/P -500mA)
Red / White ----- Boot/trunk release (O/P -500mA)
Green ----- Central Locking Unlock (O/P -500mA)
Blue ----- Central Locking Lock (O/P -500mA)
Brown ----- Siren
Blue ----- Foot Brake
Yellow ----- ACC (l/P +)
Orange ----- Goes directly into the immobiliser Relay
Green ----- Negative Door Switch (l/P-) trigger
Purple ----- Positive Door Switch (l/P+) trigger
Red Black ----- Main light )l/P+
Thick Yellow (coming out of 4 pin module) ----- To Starter Motor
Thick Yellow (coming out of 4 pin module) ----- Starter Motor Wiring
Matt this
should get you started off. Andy.
-------------
To err is human....
Thanks for the diagram, but where do the wires go?
I have never installed an alarm before, and I have no idea where to find these wires.
Thanks.
-Matt
Sorry bud don't know much about american cars. The wiring colours I describe in the previous post are the wires coming from the alarm. It may be worth while doing a google search on your car or better still search for info on your car here. Some of it is quite striaght forward but if you are unsure then the best bet is to get someone who has a good understanding of auto electrics. I'd hate for you to have a go and mess it all up!!! Its a good alarm and so's your car.
-------------
To err is human....