starts then alarm goes off?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=65199
Printed Date: May 06, 2024 at 3:38 AM
Topic: starts then alarm goes off?
Posted By: dougie109
Subject: starts then alarm goes off?
Date Posted: October 28, 2005 at 4:12 PM
carvox king eagle... please never buy it.. go with a proper alarm/keyless/start the alarm goes off after engaging the engine then does a emergency shut down then pages me.. this only happens when the engine is cold. any idea at all? ive tried everything lol Regards
Replies:
Posted By: infinkc
Date Posted: October 28, 2005 at 4:16 PM
type of car?
Posted By: dougie109
Date Posted: October 28, 2005 at 4:25 PM
Posted By: Alpine Guy
Date Posted: October 28, 2005 at 10:50 PM
which alarm goes off? the factory alarm or the aftermarket alarm?
-------------
2003 Chevy Avalanche,Eclipse CD7000,Morel Elate 5,Adire Extremis,Alpine PDX-4.150, 15" TC-3000, 2 Alpine PDX-1.1000, 470Amp HO Alt.
Posted By: dougie109
Date Posted: October 29, 2005 at 9:42 AM
the aftermarket one
Posted By: infinkc
Date Posted: October 29, 2005 at 10:15 AM
you might want to set the tach signal for the alarm when the car is cold, do you know what trigger is getting set off? is so you can bypass that sensor/trigger when the remote start is active
Posted By: dougie109
Date Posted: October 29, 2005 at 2:09 PM
how do i set the tach speed? i dont understand.. regards
Posted By: dougie109
Date Posted: October 30, 2005 at 10:53 AM
ok.. well it says nothing about that.. lol.. sounds soo right tho.. cause it would sense that right away and the voltage would be high... is there a way to manually set it? example unplug the whole unit when cold and start it from the auto start? or anything like that.. regards
Posted By: dougie109
Date Posted: October 30, 2005 at 1:18 PM
is there a way for me to regulate the voltage myself? like place a series of resistors into the circuit to let a maximum voltage of like 2.5 or something through? or is that a bad idea? beacuse the unit doesn;t look at all like it can be programmed.. says nothing about it in the book. thanks again Douglas
|