Sunfire Lights

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=65257
Printed Date: September 13, 2025 at 4:24 AM

Topic: Sunfire Lights

Posted By: maxcat
Subject: Sunfire Lights
Date Posted: October 29, 2005 at 6:53 PM

Hey Guys,

Just completed a remote start install on a 2002 Sunfire. Just a couple of quick questions:

1) when the vehicle is remote started, the theft light and service light both remain on even after key takeover. I am using a GMDLBP module for the passlock 2.

2) I've also powered up the second accessory wire (brown) - any suggestions would be greatly appreciated as I think I will try to re-program the bypass module.

Replies:

Posted By: mo12v
Date Posted: October 29, 2005 at 8:30 PM

Did you Program ByPass? ....... Does Door Locks work?
Is VIOLET wire hook to OBDll ?

Did you Power Up 2nd Ignition?

Ignition #2

WHITE

IGNITION SWITCH HARNESS

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.

Posted By: extreme1
Date Posted: October 29, 2005 at 8:44 PM

there is only 1 ignition, GMDLBP is not recommended for that vehicle.

GMBP is different.

-------------
Shaughn Murley
Install Manager, Dealer Services
Visions Electronics
Red Deer, Alberta

Posted By: maxcat
Date Posted: October 30, 2005 at 8:29 AM

thanks for the replies, mo12,yes i did program the bypass,the vehicle does not have pwer locks,and yes i hooked up the data line.there is no ignition 2 on this vehicle,but thanks again for the reply. extreme1,even though the paper work on the gmdlbp says it's compatable with this vehicle, i think you are right, because i ended up putting in a pl2004 module and that cleared everything up.

again thank you for your help

Print Page | Close Window