Print Page | Close Window

2005 Montana door locks

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=65318
Printed Date: May 18, 2024 at 10:56 PM


Topic: 2005 Montana door locks

Posted By: don-key1
Subject: 2005 Montana door locks
Date Posted: October 30, 2005 at 6:40 PM

I finally had time to look at my power door locks and still can't get them to work with my remote start module (they work fine with the 2 key fob remotes  that came with the van), I've tried every possible wire , to no avail .This is a repeat of my post from January 2005, (It's a CT-3300 with power door lock option).

It's not a big deal, but it would be nice to only need 1 remote!

Any suggestions, pictures,comments,etc...??

Thanks in advance, Don.



-------------
There's no such thing as a stupid question!



Replies:

Posted By: mo12v
Date Posted: October 30, 2005 at 7:14 PM

They are there

With Factory Keyless:
LOCK = RED / Black........ Dr kick or BCM, blue plug, pin C11
UNLOCK = ORANGE / Black ........Dr kick or BCM, blue plug, pin C5
NEGATIVE PULSE with 3 Second Pulse on UNLOCK

The door lock wires will only meter when turning the key in either door key cylinder.

On vehicles without factory alarm, use lt. blue for lock and white for unlock. The wires are in either kick panel or at the BCM, blue plug, pins C7 and C6.



-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.





Print Page | Close Window