Print Page | Close Window

Nissan Sentra, 516U Voice Module, Innosys Echo 2-Way Alarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=65346
Printed Date: September 15, 2025 at 2:02 AM


Topic: Nissan Sentra, 516U Voice Module, Innosys Echo 2-Way Alarm

Posted By: remas76
Subject: Nissan Sentra, 516U Voice Module, Innosys Echo 2-Way Alarm
Date Posted: October 31, 2005 at 7:00 AM

Below is the wiring for Innosys Echo 2 way alarm.. Have manage to connect the 516U Voice module to the alarm, And able to "Viper Arm" and "Viper Disarm". But for the green (-) Warnaway trigger input. Which cable should I connect it to so as to give "Viper protected, please stand clear" when the system detect shock.. My shock sensor is bulit in to the alarm system.

Yellow-Starter

Black-Gnd

Blue-Ignition 1

Violet-Starter Kill

White-Ignition 2 

Red-12V+ Power 

Orange-Trunk Release

Brown-Siren

Green-Door Lock

Blue-Door Unlock

Yellow-Park Lights

Pink-Ground Out When Run

Gray-Brake Pedal

Sky Blue-Generater Input


Print Page | Close Window