Alarm install ’05 350z?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=65420
Printed Date: April 30, 2024 at 10:11 AM
Topic: Alarm install ’05 350z?
Posted By: Initial Daniel
Subject: Alarm install ’05 350z?
Date Posted: November 01, 2005 at 12:44 PM
I've done alarm installs in the past, although I've never done a 350z, and I've never had to use a bypass module before. Can someone explain to me how this works, or for those who have done this install before, have anything that could help me out, or perhaps guide me? I'd really appreciate it. Thank you. The alarm is the Viper 791xv if that helps at all. Thank you.
Replies:
Posted By: Velocity Motors
Date Posted: November 01, 2005 at 1:04 PM
The bypass module is to allow you to remote start the vehicle without having to have a key in the ignition to transmit the code from the key to the Immobilizer module to allow fuel to the injectors. There have been quite a few posts about the 350Z so do a search and you can find all the posts that other's have posted about this particular car and other tips.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: Initial Daniel
Date Posted: November 01, 2005 at 1:06 PM
Ah, thanks. Yeah, I was looking at a couple of threads, but couple of them made it seem pretty hard. I was just wondering what I've gotten myself into. I def. will search a bit more though, I appreciate the info!
Posted By: Velocity Motors
Date Posted: November 01, 2005 at 1:25 PM
If you have specific questions about the installation that doesn't make sense to you, post themon this thread and you will get responses on it within a couple of hours or longer.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: mxxmikexx
Date Posted: November 01, 2005 at 2:53 PM
the car is actually pretty simple to work on. the only reason you would need an interface module would be if you are not comfortable running wires through the door boot into the drivers door to interface with the door locks.
-------------
Mike Battaglia
Specialized Car Audio
Bensenville IL 60106
Posted By: Chris Luongo
Date Posted: November 01, 2005 at 10:57 PM
Those car's aren't bad; plenty of room to work too.
Do some searches at the carsound.com forums; there are some tricks there. Search for "nissan bcm" to learn how to do locks without running wire into the doors. I've done a lot more G35s than 350Zs, but they are the same car---you might find some G35 commentary there too.
Posted By: mxxmikexx
Date Posted: November 02, 2005 at 9:51 AM
chris, that is probably some of the most useful info ive read in quite some time, you saved hours of unneccessary labor from my install career ! thanks for that link of info !
-------------
Mike Battaglia
Specialized Car Audio
Bensenville IL 60106
Posted By: Initial Daniel
Date Posted: November 02, 2005 at 3:49 PM
Awesome, thanks for the info, guys. I'll be reading that forum as well then. Hehe, I'll let you guys know what the deal is when time comes to install. Thanks too!
Posted By: Initial Daniel
Date Posted: November 02, 2005 at 4:17 PM
I had a question, I was reading the carsound forums, and it appears that they say one pulse for lock and two pulse for unlock--what exactly does that mean? Or how do you set the alarm up to do this?
Posted By: mxxmikexx
Date Posted: November 02, 2005 at 4:32 PM
you have to set that in the programming of the unit you are using. its going to be in menu 2 feature number 7 of the viper unit your using. check out page 40/41 of your install manual and it will walk you through what you have to do in order to program it to double pulse unlock. (which means its going to provide 2 pulses upon unlock, even tho you only press unlock once on the transmitters)
-------------
Mike Battaglia
Specialized Car Audio
Bensenville IL 60106
|