clifford solaris, and proximity sensor

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=65430
Printed Date: May 13, 2025 at 11:44 AM

Topic: clifford solaris, and proximity sensor

Posted By: c5sb
Subject: clifford solaris, and proximity sensor
Date Posted: November 01, 2005 at 6:11 PM

I am doing my intallation on my solaris 5 with remote start

I wont to know wath is the best way to connect my proximity sensor

I got the alarm with the original shock sensor, Smart Self-Powered Siren, I did a ECU and fuel pomp cut, with 2 relay that a connect to the ignition wire out of the clifford box.

Now I just need to know how to connect my proximity sensor, it the one with inside and outside,

thank a lote

Replies:

Posted By: c5sb
Date Posted: November 03, 2005 at 5:40 PM

if a need diode, wich one ?

Posted By: nitris
Date Posted: November 03, 2005 at 6:15 PM

why dont u splice the prox sensor to the shock sensor and you should be good to go, but then again i could be wrong

Posted By: c5sb
Date Posted: November 09, 2005 at 9:15 PM

Installation is finish, I did not install the prox sensor, after winter

I have a new probleme, I try to program the RPM for my remote start, with the plan view 2 valet switch

I go in the menu installer, a push 3 time on the black button, I heard 3 chirp

after a push 1 time on the stars button, I heard 1 chirp

after I push one time on arm/disarm, and the led don't flash, it stay on all the time

the car is running at 850 rpm

I am doing someting wrong ?

or the cliffnet wisard wire beetween the 2 box is not good ?I did a extension it was to short

thank guy

Posted By: c5sb
Date Posted: November 09, 2005 at 9:27 PM

I forget someting

when the engine is running a push the star on the remoter for remote start

I remove the key, the car stil run

I go out of the car

I arm the system, and the car is running, and the alarm is on, the led is flahsing,

to stop the car I disarm , and I need to push on the brake or I push down the E brake

thank a lote