any way to arm/disarm fact alarm in a g6?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=65442
Printed Date: May 14, 2025 at 2:31 AM
Topic: any way to arm/disarm fact alarm in a g6?
Posted By: meltingplastic
Subject: any way to arm/disarm fact alarm in a g6?
Date Posted: November 01, 2005 at 9:34 PM
hey guys,
i did a remote start in an 06 g6 today.. it went really well when i caught all the wires in the driver kick instead of the bcm.. but my question is, i had to hook up the unit sans keyless cause the factory alarm only arms and disarms through the factory remote.. to me i felt as if the install was half assed cause the customer couldnt use the entire keyfob from the 160xv. has anyone found a way to arm and disarm the factory alarm? i would like to know for the next unit i do.
-------------
Driving a Bagged, Caddied 02 s10
Replies:
Posted By: KarTuneMan
Date Posted: November 02, 2005 at 12:08 PM
It will arm on lock and a dissarm wire can be found at the BCM, connecter 1, pin 35 Lt.grn. (NEG)- pulse thru a 500ohm resistor.
-------------
Posted By: meltingplastic
Date Posted: November 02, 2005 at 6:14 PM
thanks man.. now for the next one i know... directechs says only arms and disarms through factory remote but i knew there had to be a way.. also the bcm was a B to get to the wires.. i found c1 running to the driver side of the console and down.. any advice on getting these wires next time? i found the ones i needed int he kickpanel and if i have to go to the bcm i'm kinda dreading it lol
-------------
Driving a Bagged, Caddied 02 s10
|