Viper 791XV, problem/ Question
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=65750
Printed Date: May 23, 2024 at 4:59 AM
Topic: Viper 791XV, problem/ Question
Posted By: blob_54
Subject: Viper 791XV, problem/ Question
Date Posted: November 07, 2005 at 3:05 AM
I recently installed the alarm and keyless entry on my car only.
I wanted to test it so I had my bro hi the windows to set off the alarm and have it page me... it worked
then I had him open the door and have it page me for that... it worked.
But here's the problem... now whenever I disarm the car it allerts me that the sensor and door alarms are going off or something. Also the led blinks when its not armed... it blinks 2 times then a pause then it blinks 3 times... it keeps repeating that and its getting very annoying to drive with it flashing at me, expetially at night. Also, it doesnt page me anymore since its doing that stuff.
So, here's my Q, how do I make it so when the alarm is unarmed it wont keep telling me that it did go off in the past, and also get the paging to work again? I'm pretty sure that both these issues are tied together.
Anyone with similer things happen or helpfull info will be greatfully appreciated.
-------------
1991 2dr Accord
Lowered, full intake/egzaust
Nice sound system
I'm also into xbox modding, if you have any Q's about getting yours modded or even fixed, leme know
Replies:
Posted By: kaezoo
Date Posted: November 07, 2005 at 10:01 AM
It should reset when you turn the key on and off. If it doesn't, you may not have the ignition wire hooked up correctly; you need to have the pink wire from the relay pack connected to an ignition wire. If you have only one ignition wire to power, you can't use the pink/white; you have to use the pink wire.
Posted By: blob_54
Date Posted: November 07, 2005 at 3:40 PM
ya, I didnt get the pink wire hooked up yet...
I only connected the H1 wires, but i'm gunna take some time and try to wire up the rest today
-------------
1991 2dr Accord
Lowered, full intake/egzaust
Nice sound system
I'm also into xbox modding, if you have any Q's about getting yours modded or even fixed, leme know
Posted By: kingdavid
Date Posted: November 07, 2005 at 3:51 PM
blob_54 wrote:
I recently installed the alarm and keyless entry on my car only.
I wanted to test it so I had my bro hi the windows to set off the alarm and have it page me... it worked
then I had him open the door and have it page me for that... it worked.
But here's the problem... now whenever I disarm the car it allerts me that the sensor and door alarms are going off or something. Also the led blinks when its not armed... it blinks 2 times then a pause then it blinks 3 times... it keeps repeating that and its getting very annoying to drive with it flashing at me, expetially at night. Also, it doesnt page me anymore since its doing that stuff.
So, here's my Q, how do I make it so when the alarm is unarmed it wont keep telling me that it did go off in the past, and also get the paging to work again? I'm pretty sure that both these issues are tied together.
Anyone with similer things happen or helpfull info will be greatfully appreciated.
i think u accidentally turn off the page mode..u need to go back in the remote programming press all four depends on which one u have or the button on the back of the two way. then u toggle the asterisk for page mode on .. the way that u have it set now is u will only recieve a page when u press a button on the remote to disarm, this function save on the battery life,
Posted By: redpeppers
Date Posted: November 07, 2005 at 4:00 PM
blob_54 wrote:
ya, I didnt get the pink wire hooked up yet...
I only connected the H1 wires, but i'm gunna take some time and try to wire up the rest today
when u hook the remote start part up....when u put the key in.....the problem will go away. ------------- Where theres is a wire there's a way.
Posted By: pss5075104
Date Posted: November 08, 2005 at 9:28 AM
accualy when u put the key in it will not rest it is when you turn the key to on, it will send 12v to the brain and reset the brain.
-------------
D
MECP First Class Certified Installer.
Nothing is impossable, it's just more expensive.
Posted By: blob_54
Date Posted: November 08, 2005 at 10:03 AM
ya, thnx guy's
I hooked up remote start yesterday, and all my problems went away, and teh remote start works great :), and I even figured out how to bypass the clutch, I just unhooked the w1 wires and used another wire to bridge teh connection then put some tape on it to hold it :)
if anyone has any Q's on doing this install on 90-93 accords, leme know, I'm sure it'll be the same as mine
-------------
1991 2dr Accord
Lowered, full intake/egzaust
Nice sound system
I'm also into xbox modding, if you have any Q's about getting yours modded or even fixed, leme know
|