DEI 508D

If anyone can help me with this please reply...i installed a 508D proximity sensor into my car with the power window mod. I am having the hardest time getting the 508 not to trigger every 30 minuits or so.......if i have it turned down...it barely senses anything...with it turned up it goes off when ever a leaf blows by. if anyone has any tips for me i would appreciate it thank you.

mhungerford wrote:

---

If anyone can help me with this please reply...i installed a 508D proximity sensor into my car with the power window mod. I am having the hardest time getting the 508 not to trigger every 30 minuits or so.......if i have it turned down...it barely senses anything...with it turned up it goes off when ever a leaf blows by. if anyone has any tips for me i would appreciate it thank you.

---

u need to turn down the inside sensor, thats the red light if, the red lights comes on when u walk by the window, then the alarm will trigger, do the adjustment one at a time inside first then outside, red for inside and green for outside, or u should check your connections to make sure u do not have the thing backwards....

also when u adjust the inside it will affect the outside, and vise versa.

-------------
D

MECP First Class Certified Installer.

Nothing is impossable, it's just more expensive.

kingdavid wrote:

---

mhungerford wrote:

---

If anyone can help me with this please reply...i installed a 508D proximity sensor into my car with the power window mod. I am having the hardest time getting the 508 not to trigger every 30 minuits or so.......if i have it turned down...it barely senses anything...with it turned up it goes off when ever a leaf blows by. if anyone has any tips for me i would appreciate it thank you.

---

u need to turn down the inside sensor, thats the red light if, the red lights comes on when u walk by the window, then the alarm will trigger, do the adjustment one at a time inside first then outside, red for inside and green for outside, or u should check your connections to make sure u do not have the thing backwards....

---

I was always under the impression that you do the outside first then the inside.

I have one in a Jeep Cherokee and it works perfectly!

But you do have to watch where you mount it - metal messes with it.

I have the wires correct......i do get a warn from about 3 feet away.......the unit is mounted under the center console Chevy Beretta.......i really am having problems getting it to just warn on a walk by....and arm when someone sticks there hand in the car.......i've walked up to it one time and the alarm goes off....5 minuits later i could stick my hand in the window and nothng happens.....i ended up unplugging it because it became such a neucence to my neighbors......any other sugg. would be helpfull....but it is hooked up correctly and mounted in front of my shifter inside the console.....thanks....and why do each adj. have anything to do with each other...

3FT ON warn?? that's why it's going off, the warn should be no further away than 1ft from the vehicle.

-------------
Shaughn Murley
Install Manager, Dealer Services
Visions Electronics
Red Deer, Alberta