98 accord rear defrost to clifford 3.5

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=65793
Printed Date: May 02, 2025 at 7:01 AM

Topic: 98 accord rear defrost to clifford 3.5

Posted By: accord78
Subject: 98 accord rear defrost to clifford 3.5
Date Posted: November 07, 2005 at 4:59 PM

sup guys how would i go on hooking up the rear defrost wire from the clifford matrix 3.5 to the switch for the rear defrost on this car???? 98 honda accord ex 4door/4cylinder

Replies:

Posted By: 05gt
Date Posted: November 07, 2005 at 7:51 PM

PIN 87 = (-) Defrost Switch in car
PIN 87a = Not used

PIN 30 = ground
PIN 85 = a negaive output from the alarm brain
PIN 86 = Constant power (+)

this should help you

Posted By: accord78
Date Posted: November 07, 2005 at 8:48 PM

thanks for the fast reply.... 1 more thing where and what color is the wire at the switch i need and would i be using the blue/white (-) 200ma 2nd status/defogger wire from the 3.5 brain??? so it would be

pin87= - at switch
pin87a= not used
pin30= ground
pin85= blue/white deffoger wire from 3.5
pin86=constant power

is this correct?????????

Posted By: 05gt
Date Posted: November 07, 2005 at 9:00 PM

I used a (-) aux channel from my alarm

you will have to fet behind the defroster switch in the car and do some testing with a DMM (multimeter)

but the relay is right

Print Page | Close Window