Print Page | Close Window

1999 plymouth voyager remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=65813
Printed Date: August 24, 2025 at 11:58 AM


Topic: 1999 plymouth voyager remote start

Posted By: defboy456
Subject: 1999 plymouth voyager remote start
Date Posted: November 07, 2005 at 9:47 PM

Hello,I'm pretty experienced with alarms and remote starts but I just can't seem to get over an installation going wrong.I'm trying to put a remote start/alarm combo in a buddy of mines 1999 plymouth voyager,but keep having a peoblem with the tach signal.I have a wiring sheet,but the wire  doesn't read between 1 and 6 volts ac that it gives(gray/red or gray).Then I found out that because it has the 2.4 4 banger it's the blue/tan wire off the pcm,but that didn't read right either.This is what happens:the car starts (overcranks the starter)runs for about 2 minutes then just shuts off.Winters coming quickly and I don't want to let him down,any help would really be appreciated.Specs:1999 plymouth voyager,2.4 dohc,auto,no p.locks,no p. windows,no p. trunk,no tachometer.(pretty basic).



Replies:

Posted By: mo12v
Date Posted: November 07, 2005 at 10:00 PM

Each Wire Listed Above Is A 2 Cylinder Signal. 3.0L Tach Wire Is GRAY/RED At Powertrain Control Module (PCM). 3.3L & 3.8L Tach Wire Is GRAY/RED, D BLUE/TAN And RED / YELLOW At PCM (Each Wire Is A 2 Cylinder Signal).

Try a ODD Color Fule Injector Wire............
Or go TACHLESS



-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.




Posted By: redpeppers
Date Posted: November 07, 2005 at 11:13 PM

i'm with MO12v....tag the odd color wire at one of the fuel injectors....



-------------
Where theres is a wire there's a way.




Posted By: defboy456
Date Posted: November 10, 2005 at 8:01 PM
thanks i'll try that





Print Page | Close Window