2004 Silverado Wiring & GMDL-BP troubles
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=65958
Printed Date: July 13, 2025 at 9:29 AM
Topic: 2004 Silverado Wiring & GMDL-BP troubles
Posted By: srusin1
Subject: 2004 Silverado Wiring & GMDL-BP troubles
Date Posted: November 09, 2005 at 10:10 PM
The remote start seems to work fine but the door locks work intermitently. Also the door trigger does not work? Does anyone have any experience with this module? Also does anyone have a wiring diagram?
Replies:
Posted By: NowYaKnow
Date Posted: November 09, 2005 at 10:57 PM
What wire in the vehicle did you connect the door trigger to? Should be gray/black (+) to the left side of the dash in a harness behind the fuse cover.
As for the doorlocks, did you program this truck as a type 4 and not a type 1? If so, try the other one. Also what remote start unit are you using? If it has flip flop lock outputs, you'll want to add relays.
Mike
Posted By: srusin1
Date Posted: November 10, 2005 at 8:27 AM
Im using a Crimestopper 2011RS IV, I will check with the door trigger and try to reprogram the GMDL-BP later today.
Posted By: jdeezay
Date Posted: November 16, 2005 at 7:00 PM
the 2011 has dual polarity lock outputs wire up relays so you keep the 12 away from the gmbp-dl also when you have that finished before you select the platform touch the lock input to ground it resets the unit
|