bulldog rs1100 problem
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=65964
Printed Date: May 05, 2024 at 8:14 PM
Topic: bulldog rs1100 problem
Posted By: recniz
Subject: bulldog rs1100 problem
Date Posted: November 09, 2005 at 11:27 PM
I just finished installing my bulldog rs1100 that I got used off ebay into my 94 explorer. Everything when well, it would start my truck no problem, lock/unlock the doors without a glitch. I was happy untill I decided to reset the memory using the steps in the manual. I held down on the brake, turn the key on/off 5 times with in 4 sec, the unit then flashed the patking lighs 3 time. then I disconnected all the wiring for 1 minute. Upon reconnecting the unit the parking lights started to flash none stop and thats all it does now, flash the parking lights over and over and over. Pressing the buttons on the remote doesn't help, i even tryed reseting the unit agian but all is does is flash. Can anybody tell me WTF is going on.
Thanks
Justin
Replies:
Posted By: slammedb5
Date Posted: November 10, 2005 at 4:06 AM
it's a bulldog. send it back.
-------------
EK Civic
security
no audio
Posted By: kgerry
Date Posted: November 10, 2005 at 11:12 AM
if everything was working fine, why did you decide to reset it?
-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer
Owner/Installer
Classic Car Audio
since 1979
Posted By: accord78
Date Posted: November 10, 2005 at 6:05 PM
it's in safety mode..... but they do suck but anyways u have to connect everything back up they lights will start to flash... step 1 open the hood step 2 step on the brake. step 3 whyle holding on the brake turn key to on position and they should stop
|