fusion door locks
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=65979
Printed Date: July 13, 2025 at 6:18 PM
Topic: fusion door locks
Posted By: knight150
Subject: fusion door locks
Date Posted: November 10, 2005 at 5:28 AM
hey everyone, got a quick question. I installed fusion doorlocks(2 5wire sets) in a ford van. They were working fine for a few months but all of a sudden, when u hit the lock button, they lock and immediately unlock, within like 1 second. There were 2 modulars and I thought they went bad but that wasnt the case either. Just wondeirn if u guys have any ideas for me.
thanks
Replies:
Posted By: ziggyb222
Date Posted: November 10, 2005 at 7:14 AM
Where all of the doors closed when trying to lock them??? I know some Fords do not like to lock and stay locked when the door is opened..Just a thought....
Posted By: ziggyb222
Date Posted: November 10, 2005 at 7:19 AM
Is there a proceedure to program the transmitters??? They might need to be reprogrammed since you cleared the memory
Posted By: knight150
Date Posted: November 10, 2005 at 8:51 AM
no dont think that they have to be programed. They are very basic actuators. You just connect 2 of them together and give it a negative pulse and ur done. Like i said they were working for a while and all of a sudden they dont wanna work. Every now and then they will stay locked but everything i installed was aftermarket. Its just a plain van thats all. Just wonderin what u gusy think
Posted By: NowYaKnow
Date Posted: November 10, 2005 at 5:07 PM
One or both of them is no longer properly adjusted. The 5 wire ones will do that because it's the nature of central locking. Pull the panels and readjust.
Mike
|