Remote starter/keyless entry/alarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=66067
Printed Date: May 23, 2024 at 3:57 AM

Topic: Remote starter/keyless entry/alarm

Posted By: Trent109
Subject: Remote starter/keyless entry/alarm
Date Posted: November 11, 2005 at 4:01 PM

Ok, i have an O1' eclipse, im tryin to put in a Air Wolf Two way remote car starter. Well i got the first plug all wired up, that has the Ignition wires (2) Ground, starter wire 12v battery power all that good stuff for power, well i pluged that into the module, and it turns on all the light on as if its about to start. is this because i dont have the rest of the loom hooked up, or is my module defective? I have checked my wiring and it looks good accordin to the alamrs instructions and the color chart to the model of my car, is there something else ishould do?

Thanks

Replies:

Posted By: KarTuneMan
Date Posted: November 11, 2005 at 5:10 PM

This vehicle has a transponder ign. system that need to be bypassed.....is that done?

Is this a manual transmission? I don't believe this unit is designed for a manual trans! (clutch bypass, door monitoring, hand brake....etc.)

-------------

Posted By: Trent109
Date Posted: November 11, 2005 at 6:16 PM

My car is automatic, and i have the bypass module, but i think they sold me the wrong one for this application, they gave me a PASS4 module, if you need a pic let me know. but the lights come on with out me pressing any buttons on the remotes, that doesnt really sound normal to me. but in a few, i will have a picture of the wiring diagram. and if you know the diagram. I have the CON1 6Pin wiring done.

Posted By: Velocity Motors
Date Posted: November 11, 2005 at 9:17 PM

If you only have th 6 wires in CON1 hooke dup at the unit is giving power to the IGN wires, then you have a problem. There should only be power to the IGN wires prior to remote start. You may have a faulty CPU.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA