Print Page | Close Window

Correct way to splice wiring?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=66121
Printed Date: May 31, 2024 at 6:59 PM


Topic: Correct way to splice wiring?

Posted By: g-man604
Subject: Correct way to splice wiring?
Date Posted: November 12, 2005 at 3:14 PM

Im interested to hear what differnt products and or techniques the pros' use to splice into existing circuits...

-------------
Its all Mind over matter... I dont mind so it dont matter



Replies:

Posted By: dualsport
Date Posted: November 12, 2005 at 7:28 PM
Solder and heat shrink has my vote too-
and on the other end of the spectrum, strip,wrap,and tape. Guaranteed failure over the long haul.

Posi-lock connectors, not to be confused with Scotch-lok, are good, but expensive- don't think they're used much. They're nice because they can be easily removed for troubleshooting.





Print Page | Close Window