05 dodge durango valet 561T

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=66144
Printed Date: August 12, 2025 at 9:15 PM

Topic: 05 dodge durango valet 561T

Posted By: dam21921
Subject: 05 dodge durango valet 561T
Date Posted: November 12, 2005 at 8:32 PM

how do i hook up my negative pulse input activation on the valet 561T in an 05 dodge durango with single wire door locks?

thanks for any help

-------------
dam21921

Replies:

Posted By: mo12v
Date Posted: November 12, 2005 at 9:19 PM

If I was doing R /S & Door Locks....I use OMEGA:

Chrysler Doorlock Alarm & Interface: 2005+ Chrysler/Jeep (DB-CHDL7)

Otherwise you could hardwire..... posted_image

.....
You may need RELAYS for a sTRONGER GROUND

Power Lock	VIOLET/DK GREEN	AT BCM (W/O MEMORY SEATS) **
Power Unlock	SINGLE WIRE SYSTEM	IN DRIVER DOOR (W/MEMORY SEATS) **

** Requires Chassis Ground Thru 330 Ohm Resistor For LOCK And Chassis Ground Thru 100 Ohm Resistor For UNLOCK

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.

Posted By: mo12v
Date Posted: November 13, 2005 at 3:27 PM

Boy .....Did I mis read that one................
You could get a NEGATIVE Pulse from your Door Lock or UNLOCK wire to activate R /S.....sorry 'bout that

One of these should show GROUND when Lock or UNLOCK

Motor Lock	LIGHT GREEN	DRIVER KICK PANEL *
Motor Unlock	TAN/ORANGE	DRIVER KICK PANEL

KICK ME............

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.