Print Page | Close Window

viper 791xv in 93 accord 5spd

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=66167
Printed Date: August 17, 2025 at 7:41 PM


Topic: viper 791xv in 93 accord 5spd

Posted By: rifat83
Subject: viper 791xv in 93 accord 5spd
Date Posted: November 13, 2005 at 7:13 AM

hi all

i am new here. i have been reading this forum for last 24 hours and there is a big debate going on installing rs on mannual tranny. however i have decided to put it on my car. i am installing viper 791 which is meant to be installed in a auto tranny. I have come to know about many safety features such as neutral safety swtich, magnet reed and so on. however i liked this one the best:

creating a contact on stick shift so that when your stick is in gear it doesnt have a ground to complete the circuit in your start module

can anyone give me a little help on how to perform this job? I am not installing this by myself. my friend who works for ccity installing this. he has done a lot of these but not in manual tranny. thanks for your help and cooperation.




Replies:

Posted By: KarTuneMan
Date Posted: November 13, 2005 at 10:00 PM
The Viper 791 (and all viper products) are NOT designed for manual transmission...... don't do it....you'll hurt someoine or do some serious property damage

-------------



Posted By: gus1
Date Posted: November 13, 2005 at 11:25 PM
The only safe way is to use either a 668M or a 669M.

Gus


-------------
Wherever I go, that is where I end up......


Print Page | Close Window