Print Page | Close Window

Neutral Safety Switch, 89 Mustang

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=66196
Printed Date: August 25, 2025 at 1:25 PM


Topic: Neutral Safety Switch, 89 Mustang

Posted By: Nebey
Subject: Neutral Safety Switch, 89 Mustang
Date Posted: November 13, 2005 at 3:36 PM

Hey so I am installing a remote starter in my 89 mustang, I have got it all wired in, everything works good, except I havn't figured out what to do about the neutral safety switch.  I think I found it, has 2 sets of wires going into it, its white plastic, and seems to move as push in the clutch.  do I connect 2 wires together? if so which ones? so I somehow mechanically close the switch? remove it and relocate it?

IThanks for your time

Mike




Replies:

Posted By: Nebey
Date Posted: November 13, 2005 at 3:53 PM

ahh ok, maybe I was miss-reading the printout.... ok so the clutch switch




Posted By: KarTuneMan
Date Posted: November 13, 2005 at 3:57 PM
What are you installing (make and model)

-------------



Posted By: Nebey
Date Posted: November 13, 2005 at 5:12 PM

I am putting a remote start into my 1989 Ford Mustang, with a manual transmission.  I want the car to be ablt to start without having to push the clutch in.

The remote start is by Polar Start I do believe... something like that anyways... I have looked at it so much, I have fogotten...




Posted By: 05gt
Date Posted: November 13, 2005 at 7:41 PM
just bypass the clutch with a relay



Posted By: KarTuneMan
Date Posted: November 13, 2005 at 9:57 PM

KarTuneMan wrote:
What are you installing (make and model)

What type of R/S......?



-------------


Print Page | Close Window