DEI 508D wires
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=66350
Printed Date: May 03, 2024 at 7:01 AM
Topic: DEI 508D wires
Posted By: jpnuebel
Subject: DEI 508D wires
Date Posted: November 15, 2005 at 9:24 PM
I'm adding a 508 sensor to a viper 791 and I'm curious why the wire harness has plugs on both ends? I realize you need to cut and tap into the mulitplex input but was wondering why DEI has a plug.
THANX
jpn
Replies:
Posted By: cntrylvr79
Date Posted: November 15, 2005 at 9:39 PM
Because some of their systems have a built in shock sensor and a plug for extra sensors. Were you to be using one of those systems you'd be able to just plug the motion sensor in.
------------- Cause I'm So white and nerdy...
First Class Certi-fried installer
Posted By: Hornshockey
Date Posted: November 15, 2005 at 9:39 PM
some of their security models have shock sensors built into the brain and have a multiplex port that you can plug into that provides power ground and the trigger input.
------------- Life moves pretty fast; if you don't stop and look around once in a while; you could miss it.
|