2006 hummer H3
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=66462
Printed Date: April 29, 2024 at 9:44 AM
Topic: 2006 hummer H3
Posted By: mxxmikexx
Subject: 2006 hummer H3
Date Posted: November 17, 2005 at 4:40 PM
I just got done installing a remote start/keyless in a brand new H3. I wound up grabbing the lock wires in the door boot harness (inside the vehicle) are a pain in the ass to grab at that location (light blue and a dark blue) has anyone found an easier place to grab them . dei says in the drivers kick , but i couldnt find them there. or they say in the pass. kick at the BCM. which is also hard to access the wires.
-------------
Mike Battaglia
Specialized Car Audio
Bensenville IL 60106
Replies:
Posted By: daze
Date Posted: November 17, 2005 at 9:24 PM
wouldnt there 457gw work for locks and passkey ? ------------- Thats my 2 cents.... take it for what its worth!
Nothing can replace experience
Posted By: KarTuneMan
Date Posted: November 17, 2005 at 10:17 PM
Saturn Ion type passkey.....you can use the 457gw for passkey only...not the locks!
-------------
Posted By: extreme1
Date Posted: November 17, 2005 at 11:50 PM
H3 is essentially a canyon/colorado, I don't go anywhere but in the drivers kick for RS
-------------
Shaughn Murley
Install Manager, Dealer Services
Visions Electronics
Red Deer, Alberta
Posted By: honomichl
Date Posted: November 18, 2005 at 5:04 AM
Off topic do the H3 get better gas then the H2 ------------- you can't be ahead of the curb if you aren't LIVIN LOUD
Posted By: mxxmikexx
Date Posted: November 18, 2005 at 6:19 PM
so maybe i was just blind. they are in the drivers kick?
theres really no need for the module when you have regular door lock wires, and you can use a $1 relay and resistor for the PK2
-------------
Mike Battaglia
Specialized Car Audio
Bensenville IL 60106
Posted By: daze
Date Posted: November 18, 2005 at 8:08 PM
looks like it could have been useful since you could not find the locks and spent more time looking, it only would have taken one wire to databus line ! ------------- Thats my 2 cents.... take it for what its worth!
Nothing can replace experience
Posted By: mxxmikexx
Date Posted: November 18, 2005 at 8:26 PM
i found the locks, i was just curious for an easier location. y spend more money on parts to make less money on profit?
-------------
Mike Battaglia
Specialized Car Audio
Bensenville IL 60106
Posted By: extreme1
Date Posted: November 18, 2005 at 10:15 PM
there is no data lock module for the H3
-------------
Shaughn Murley
Install Manager, Dealer Services
Visions Electronics
Red Deer, Alberta
Posted By: NowYaKnow
Date Posted: November 19, 2005 at 1:02 PM
They are in the driver kick, but it's in the harness that is coming from the driver door boot (easy to get to), I don't think they are in the harness leading to the rear of the vehicle.
Mike
Posted By: mxxmikexx
Date Posted: November 19, 2005 at 1:35 PM
yeah, thats where i got them, in the harness coming in from the drivers door, i was just curious if they actually in the harness behind the kick going to the back like DEI says. imop it would of been easier, but i guess they arent in the kick
-------------
Mike Battaglia
Specialized Car Audio
Bensenville IL 60106
Posted By: extreme1
Date Posted: November 19, 2005 at 2:11 PM
when Directechs says kickpanel, it means anywhere from the floor of the vehicle to the top of the dash.
They aren't real specific
-------------
Shaughn Murley
Install Manager, Dealer Services
Visions Electronics
Red Deer, Alberta
|