Print Page | Close Window

Starter grindes on remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=66491
Printed Date: July 07, 2025 at 2:02 AM


Topic: Starter grindes on remote start

Posted By: rdlybeck
Subject: Starter grindes on remote start
Date Posted: November 17, 2005 at 11:35 PM

Installed carvox alarm on 99 Nissan Pathfinder,  Wired the two start wires as explained here, added starter disable relay that came with system.  Now did not hook up the tach.  When I remote start, it continues to grind the starter as if the remote start does not know it has started.  Is this because of the tach not being connected?  I didn't think so but can't think of what is going on.  Any help please??

-------------
Ryan Lybeck
"Wiring diagrams are nice but still double check with DMM"!



Replies:

Posted By: 05gt
Date Posted: November 17, 2005 at 11:36 PM
it is doing this cause the tach is not connected, the brain doesn't know that the car is started


Print Page | Close Window