Print Page | Close Window

2002 Trailblazer remote start, 457GW?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=66507
Printed Date: May 08, 2024 at 5:29 PM

Topic: 2002 Trailblazer remote start, 457GW?

Posted By: nei00755
Subject: 2002 Trailblazer remote start, 457GW?
Date Posted: November 18, 2005 at 10:03 AM

I am installing a remote start in a 2002 Trailblazer this weekend. I recieved the 457GW and it is the first time I will be using that type of combo unit.

My question is, Do I have to do any different wiring for the passlock 2, like you would normally have to do with seperate boxes?? The instructions talk about modifing for passkey 3 but not passlock 2. Does the DATA line that this unit hooks into just take care of the passlock 2 for me, or do I need to cut the yellow wire and wire it in like I would normally??

I know I probably explained it like crap, but hopefully somone will understand what I am trying to say.

Thanks

Jeff

Replies:

Posted By: JWorm
Date Posted: November 18, 2005 at 10:40 AM

Passlock 2 and doorlocks are all done thru the data wire. The yellow wire that you used to cut does not get touched.

Posted By: nei00755
Date Posted: November 18, 2005 at 11:01 AM

Thank you very much!! Anything else special about this 457GW unit that I should know about?? It sounds like an installers dream product!!

Print Page | Close Window