Print Page | Close Window

Siren Output

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=6655
Printed Date: September 09, 2025 at 2:58 AM


Topic: Siren Output

Posted By: crroush
Subject: Siren Output
Date Posted: December 13, 2002 at 6:46 PM

I am experiencing a strange problem on a crimestopper 2000 that I put in a car today, for some reason when you arm or disarm there is always a 12+ output to the siren, also the outputs for both unlock and lock doorlocks do not work.  I am assuming that the brain of the alarm may be defective, however, just wanted to throw a post out to see if anyone else has seen a problem like this, to better trouble shoot the situation.  Just for clarification, all the wires have been checked 3 times to insure that everything else is wired correclty, the car is a 1979 camaro z28. 

Craig




Replies:

Posted By: securinu
Date Posted: December 13, 2002 at 10:09 PM
sounds like a dead brain to me



Posted By: crroush
Date Posted: December 13, 2002 at 11:43 PM

yup...its seems like its EXCHANGE time in the city!

Craig




Posted By: webguy
Date Posted: December 14, 2002 at 12:32 PM
Over ten years ago, Crimestopper had a bad problem with out-of-the-box defects. Maybe some things never change..............

-------------
Clean tools = Clean work!


Print Page | Close Window