Print Page | Close Window

Alarm with turbo timer

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=66712
Printed Date: July 14, 2025 at 9:22 AM


Topic: Alarm with turbo timer

Posted By: Meerkat
Subject: Alarm with turbo timer
Date Posted: November 21, 2005 at 12:23 AM

Howdy team, just wondering how I would go about installing an alarm in a car with a turbo timer. Ive put a few alarms in before, but none with turbo timers. The alarm is a Fusion F-2000. If the "arm" button is pressed while the engine is running all it does is lock all the doors and enter anti-hijacking mode (or something like that), so obviously if I try arming the alarm while the turbo timer is still counting down thats what it does...doesnt actually arm the alarm.

Whats the usual way of getting around this?

Cheers




Replies:

Posted By: Evolution-UK
Date Posted: November 21, 2005 at 2:21 AM
It all depends on what happens with the channel outputs when you arm the alarm. If they remain active when you arm the alarm then you can make a turbo timer accessory. If (like most) they shut down when you arm the alarm then you can't.

Clifford can definately power a turbo timer accessory. Not sure about the other DEI range though.


Print Page | Close Window