96 explorer tach wire

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=66724
Printed Date: May 16, 2025 at 8:07 PM

Topic: 96 explorer tach wire

Posted By: bestbuymn
Subject: 96 explorer tach wire
Date Posted: November 21, 2005 at 7:17 AM

I am Working on a 96 ford explorer for a remote start and according to the DEI tech sheet the tach wire is tan / YELLOW at the PCM however in testing that wire it doesnt change voltage with the increase in RPM so i dont believe it and there are no other of that color code in that bundle... any ideas other than the back of the instrument cluster?? Thanks!

Replies:

Posted By: Velocity Motors
Date Posted: November 21, 2005 at 7:26 AM

Use the injector wire instead of the tach wire at the PCM. It will be uncommon color wire among the pairs on the top of the injectors.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: bestbuymn
Date Posted: November 21, 2005 at 8:00 AM

Thanks for the help

Print Page | Close Window