2004 Toyota Tundra Double Cab

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=66733
Printed Date: May 15, 2025 at 3:37 PM

Topic: 2004 Toyota Tundra Double Cab

Posted By: arlbrl
Subject: 2004 Toyota Tundra Double Cab
Date Posted: November 21, 2005 at 10:12 AM

I installed a Prestige 996 with remote start into my sister's truck and was not able to figure out the door lock part of the install. Everything else on the alarm works, ecxept the door locks. Can anyone help me figure out the door locks. I tried to tap into the color code wires at the switch as well as the motor but this did not work. Does this model alarm need the relays to operate the door locks or are the relays built into the module? Any help would be appreciated. Thanks in advance.

-------------
T-Man

Replies:

Posted By: KarTuneMan
Date Posted: November 21, 2005 at 11:51 AM

https://www.directechs.com/techtips/pdfs/resources/security/directed_techtips/1070.pdf

look hear.....

-------------

Posted By: techfiftyfive
Date Posted: November 22, 2005 at 2:16 AM

I usually mount the relay inside the door panel, using the Blue/White wire under the switch's for my constant 12v.

Posted By: HUmberto
Date Posted: November 23, 2005 at 10:17 AM

look inside the driver door switch at the circuit board, you should see two soldering pint with (DL) white print and another one with Du or something, that is negative polarity.