2001 camry alarm/ remote start
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=66849
Printed Date: July 12, 2025 at 3:14 PM
Topic: 2001 camry alarm/ remote start
Posted By: start25
Subject: 2001 camry alarm/ remote start
Date Posted: November 22, 2005 at 5:16 PM
What diodes would I need to install the alarm/remote starter. If I have 2 ignition wires and 1 ignition wire from starter unit how do I connect them both to the alarm so that the are not connected to each other?
Replies:
Posted By: 05gt
Date Posted: November 22, 2005 at 5:23 PM
use a relay hook uo the ignition wire from the alarm/remote starter to the ignition wire in the vehicle pin 85 goes to the ignition wire from the remote start/alarm brain pin 86 goes to the alarm brains ground out when running wire/or (-) status wire pin 30 goes to the second ignition wire in the car pin 87 goes 12 volts (constant)
Posted By: start25
Date Posted: November 22, 2005 at 9:29 PM
How do you determine what door lock system you have on your car?
Posted By: start25
Date Posted: November 22, 2005 at 10:02 PM
Hello, I'm planning to install CRIMESTOPER alarm/ remote start on 2000 Camry with keyless intry option. Please give me advise from your experience, this is my first camry... How to install door lock option, what kinda door lock system does it have what do you do with the child safty wire? Tech wire... Factory alarm wire... OEM Alarm disarm...
Posted By: Mike M2
Date Posted: November 23, 2005 at 6:24 AM
Use blue for unlock and blue for lock, in the drivers kick. They meter from the key cylinder in the door. You don't need relays, direct hookup from the alarm brain. If you have a factory alarm this will arm and disarm it also. For tach use the black wire on the coil....
-------------
Mike M2
Tech Manager
CS Dealer Services
Posted By: Mike M2
Date Posted: November 23, 2005 at 6:28 AM
Oopps! Brain fart. That's blue/white for lock....
-------------
Mike M2
Tech Manager
CS Dealer Services
Posted By: Velocity Motors
Date Posted: November 23, 2005 at 8:16 AM
start25, do a search in the forums prior to beginning this installation as there is an abundance of information on the forums for the Toyota and it will benefit you alot if you just type in " Toyota Camry " in the search button above. You will find most if not all the information that you will need in order to get the RS installed.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: start25
Date Posted: December 06, 2005 at 4:17 PM
Hi, I'm planning to intall alarm/starter (crimestoper) on 2001 Camry, Can you tell me what Alarm Input wire on the car is? What wire do you hook up to it? Also it has child safety wire, what do I do with that, do I have to hook up door lock wires some special way? Please help!!!!
Posted By: Mike M2
Date Posted: December 06, 2005 at 4:48 PM
You use blue for unlock and blue/red for lock, either in the passengers kickpanel or the orange plug at the bottom of the fuse box. There is no child safety wire if you use these wire, test them by turning the key in the p;assenger door...
-------------
Mike M2
Tech Manager
CS Dealer Services
Posted By: start25
Date Posted: December 07, 2005 at 2:12 PM
Thanks alot, inntalled succesefully!!!
|