Print Page | Close Window

Almost stumped by 02 Tahoe r/s problem.

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=66934
Printed Date: May 23, 2025 at 11:24 PM


Topic: Almost stumped by 02 Tahoe r/s problem.

Posted By: csorb
Subject: Almost stumped by 02 Tahoe r/s problem.
Date Posted: November 24, 2005 at 8:24 AM

Installed a remote starter into a 2002 Chevy Tahoe. When the car is remote started, the Transmission control module does not turn on properly and the car won't shift right.
a) The white wire IS connected and is going on during start.
b) Pink and Orange wires are going on properly too

c) I swapped the remote starter brain
d) I swapped the Omega ib-gmbp



Replies:

Posted By: kgerry
Date Posted: November 24, 2005 at 9:10 AM
meter to verify that you have 12 v on the white wire, not just that it is connected.....   does it work fine if started with the key?

-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer

Owner/Installer
Classic Car Audio
since 1979



Posted By: mo12v
Date Posted: November 24, 2005 at 9:21 AM

Also make sure it is the Correct WHITE Wire..............
Here is how I wire it:

PINK = Ignition 1
WHITE = Ignition 2
ORANGE = Ignition 3
BROWN     = Accessory



-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.



Posted By: Teamrf
Date Posted: November 24, 2005 at 9:30 PM
Did you use relays to power all the igntions in the car?

-------------
~The Rookie~
Rookie of the year that is...
Don't let the smoke out of your equiptment..it doesn't go back in.



Posted By: csorb
Date Posted: November 27, 2005 at 11:50 AM
Happy to say we found the problem. - a cold solder. Every time I tested the white wire it tested fine but when the car was driven it lost contact and effected the trans. Thanks for all your help.


Print Page | Close Window