Audiovox AX-900 transmitter programming

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=67013
Printed Date: July 12, 2025 at 7:50 PM

Topic: Audiovox AX-900 transmitter programming

Posted By: kaezoo
Subject: Audiovox AX-900 transmitter programming
Date Posted: November 25, 2005 at 7:43 PM

We installed this remote start / alarm into a Windstar with dual power sliding doors. The doors operate from a negative pulse so we used channel 4 and channel 5 from the alarm to control the doors. The problem is that I couldn't find anywhere in any of the manuals what buttons are used to activate channel 5 (or 6 or 7, for that matter). I tried to program the transmitters; I can get one door to work from the "option" button, but not the other. There aren't enough buttons for single-button control of the channels so a combination will have to be used for channel 5; however, the unit won't accept programming when more than one button is pressed at the same time. Anyone know the trick for programming these channels on the AX-900?

Replies:

Posted By: cntrylvr79
Date Posted: November 26, 2005 at 6:53 PM

Programming those transmitters is a pain in the ass, I know the button list is in one of the 50000 booklets that comes with the unit. I'll check my copy of the manuals tomorrow at work if no one else helps you out before then.

-------------
Cause I'm So white and nerdy...
First Class Certi-fried installer

Posted By: cntrylvr79
Date Posted: November 27, 2005 at 11:02 PM

Well after digging through all of my manuals I can't seem to find the one for programming transmitters to the brain. Sorry cheif, might have to call audiovox on that one.

-------------
Cause I'm So white and nerdy...
First Class Certi-fried installer