2005 sienna door locks

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=67016
Printed Date: July 13, 2025 at 5:19 AM

Topic: 2005 sienna door locks

Posted By: desh187
Subject: 2005 sienna door locks
Date Posted: November 25, 2005 at 8:07 PM

What is the right power unlock wire and location on this vehicle.I used blue which is a 2 step unlock in driver kick panel.would using blue from passenger kick panel give me one step unlock and is there a child safety wire present? Thanks in advance.

Replies:

Posted By: 05gt
Date Posted: November 25, 2005 at 9:55 PM

use the blue in the driver kick panel and program the alarm for double pulse unlock,

if your alarm doesn't allow for that use the blue / YELLOW wire in the passenger kick panel for unlock, it is also negative

Posted By: Mike M2
Date Posted: November 26, 2005 at 7:24 AM

Just a side note, make sure you use a negative light flash....

-------------
Mike M2
Tech Manager
CS Dealer Services

Posted By: Chris Luongo
Date Posted: November 26, 2005 at 5:57 PM

As long as you're using an unlock wire that tests as ground when you twist tke key in the door to the unlock position....... you don't need any child safety wire. The car will unlock 100% of the time, the domelight will turn on, and it'll disarm the factory alarm if you have one.

Posted By: techfiftyfive
Date Posted: November 26, 2005 at 11:33 PM

Mike M2 wrote:

Just a side note, make sure you use a negative light flash....

A BIG side note ;] Co-worker fried something up when he didnt use the negative...

Print Page | Close Window