Print Page | Close Window

Mazda 6’s door lock wire

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=67143
Printed Date: May 10, 2025 at 6:07 PM


Topic: Mazda 6’s door lock wire

Posted By: mxxmikexx
Subject: Mazda 6’s door lock wire
Date Posted: November 27, 2005 at 5:58 PM

Is the lt.green door lock wire really in the drivers kick? i know where to grab it on the pass. side, but i couldnt find it on the drivers side. is it behind the plastic kick panel, above it, etc.... i know DEI can be pretty vague sometimes. Maybe i was to impatient and gave up to soon, does anyone have a pic they can post from astrochart or similar database with pictures ?

-------------
Mike Battaglia
Specialized Car Audio
Bensenville IL 60106



Replies:

Posted By: NowYaKnow
Date Posted: November 27, 2005 at 7:01 PM
The easiest place to grab the lock/unlock/OEM disarm wires in that vehicle is on the passenger side of the center console.

Mike



Posted By: KarTuneMan
Date Posted: December 02, 2005 at 2:15 AM

It's neer the PCM.....a harness leading to the rear connector.

PM me your email address and Ill send you a pic from the astochart......



-------------



Posted By: Geeque
Date Posted: December 02, 2005 at 4:19 PM
What yr Mazda 6? 2003-2004- lt. grn. in drivers kick, lock requires - thru 1400 ohm resistor and unlock requires straight - pulse. 2005- same as 2003-2004 but you'll need a 1000 ohm resistor.

-------------
Gary Kline
MECP Master Technician


Print Page | Close Window