hi
i installed remot starter pro start ct 3300 in grand am 1999 i got too many problems first i couldnt find the tech wire so i connected to the coil pack with the wite wire in the coil pack second the ar 2 pink wire for the ignition the same guage and for the acc ther are 2 orenge wires the same guage the 3rd problem the car is cranking with no start and when i start the car with the remot i dont see any light in the dashboare it just crank the i have to push the brake to stop it only one thing i got it to work its the lock unlock
any help please
thanx
u have to power up the green wire also as a second igntion and that car also has passlock 2 as far as the 2 pink 2 orange wires just us on of each
ok thank u for the information but i have qustion i need to bypass permenatly the passlock with no madual or no relay just the resistor and wher to connect the resistor between the yelow wir key sid or the madual sid and how to messur the rresistor between the yelow wire and the black wire.
thanx
ok cut the yellow wire and strip the black,put the red lead on the key side of the yellow and the black lead on the stripped black put the car in reverese and turn the key to the start postion and read the resistance valuse keep it cloe to 5 percent then find the matching resistor and put them on the module side of the yellow wire the end goinf away from the switch and the other end to the stripped blcak and tape the other yelllow coming from the switch and that should work ps u can get tach at the ecm under the drivers dash white wire