Print Page | Close Window

1997 Buick Park Ave, Viper 160xv

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=67289
Printed Date: July 07, 2025 at 11:53 AM


Topic: 1997 Buick Park Ave, Viper 160xv

Posted By: bestbuymn
Subject: 1997 Buick Park Ave, Viper 160xv
Date Posted: November 29, 2005 at 9:06 PM

I am installing a Viper 160xv into a 1997 Buick park ave. I have 2 questions.

1) Do i really have to go into the doors for the locks, or are the wires accessable in the DKP door harness or just somewhere in the DKP?

2) The customer wants trunk release.... the vehicles trunk release is negative, as is the 200mA 2nd channel output of the Viper... should i just use the 2nd channel output wire from the viper and hook it straight to the trunk release wire of the vehicle?


Thanks!!!



Replies:

Posted By: mo12v
Date Posted: November 29, 2005 at 9:19 PM

You could use the OMEGA:

GM Passkey 3 & Passlock 2 Override Interface (DB-PASS-23A)
    posted_image
posted_image
posted_imageposted_imageGM Doorlock Alarm & Transponder/Passlock Interface (DB-GMDLBP)
    posted_image
posted_image
posted_imageposted_imageMulti Vehicle Databus Doorlock Alarm Interface (DB-DLMT)
    posted_image
posted_image

Also ....the Trunk is NEGATIVE Pulse and a lot of installers hook directly to it, but the Manufacturer recommends a Relay......

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.


Print Page | Close Window