Print Page | Close Window

neutral safety wire?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=67368
Printed Date: July 21, 2025 at 9:34 PM


Topic: neutral safety wire?

Posted By: equate
Subject: neutral safety wire?
Date Posted: November 30, 2005 at 10:47 PM

It there neutral safety wire on all of the standard vehicles? Where is it? under the gear cover???




Replies:

Posted By: auex
Date Posted: November 30, 2005 at 10:48 PM
Depends on the vehicle. Very few have them, rely on the clutch switch more often.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.



Posted By: equate
Date Posted: November 30, 2005 at 11:38 PM
so I have to use the ig1 to trigger a relay to bypasss the cluth? if so, that means all of the remote start products can be installed on standard vehicles.



Posted By: redpeppers
Date Posted: December 01, 2005 at 1:25 AM
if u byapss the clutch switch wires than it can be installed with no problems....use the status output wire instead of ign wire

-------------
Where theres is a wire there's a way.


Print Page | Close Window