Cold start problem, Carvox Remote starter

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=67404
Printed Date: July 12, 2025 at 6:48 AM

Topic: Cold start problem, Carvox Remote starter

Posted By: sirussirus
Subject: Cold start problem, Carvox Remote starter
Date Posted: December 01, 2005 at 12:30 PM

Hi,

I install a Carvox 2-way Remote starter into a Chevy corsica 1995. When it's cold the starter stop cranking after few second and did not try cranking 3 time like suposed. With the key the car start perfectly.

I have few question:

1- I have 2 ignition wire on the carvox king eagle starter box. On the corsica I have only one ignition wire.

So I install the 2 wire together with the ignition wire of the car. That's correct or I made a problem with that installation???

Somebody have a suggestion or comments?

Thanks.

Replies:

Posted By: Johnnynguyen20
Date Posted: December 01, 2005 at 3:43 PM

if your car have only 1 ingition, just connect the 1 ignition wire into it. for the 2 ignition leave it alone. but if you car have 2 acc than you can connect the 2 ignition into 2 acc.

-------------
Johnnynguyen

Posted By: sirussirus
Date Posted: December 01, 2005 at 4:21 PM

Hi,

The fact that the two ignition wire are connected together can cause the cranking problem when it's cold??

I'll try the suggestion. Thanks