1992 Nissan Maxima SE Remote Start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=67409
Printed Date: July 12, 2025 at 8:12 PM

Topic: 1992 Nissan Maxima SE Remote Start

Posted By: dbennett9
Subject: 1992 Nissan Maxima SE Remote Start
Date Posted: December 01, 2005 at 3:17 PM

Hi all

Really need your help, I am installing a bull dog remote starter on the above car and have found nearly all the wires i require except the Factory Alarm Disarm.

I have sources from three places saying on an anti theft unit near the steering wheel, I have found two units, one has large wires going to it the other has many more smaller wires but neither say Anti theft on as I had beeen advised.

I searched this site and it said GREEN / WHITE in the drivers kick but i wasnt sure if that was the same for this car.

I am going to start putting the wires in place and hopefully i will have a reply by the time i'm done.

Please help, i am fitting this in calgary and it freezing.

Dan Bennett

Replies:

Posted By: Mike M2
Date Posted: December 01, 2005 at 4:17 PM

I have light GREEN/ black with silver dots at the antitheft mod left of the column. I should meter by turning the key in the drivers door. GREEN / WHITE is the arm wire.

-------------
Mike M2
Tech Manager
CS Dealer Services

Posted By: dbennett9
Date Posted: December 02, 2005 at 9:50 AM

Thanks for that

I am having trouble locatiing the anti theft unit because in that area there are two boxes, one white and one black. The black one has less wires going into it than the white. Also the wires that go into the white box are a lot smaller.\

I noticed on the info i got that the wire is a negative trigger?, if this is so should the wire go to negative when the key is placed in the ignition?

Dan Bennett