trunk release Dodge Neon

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=67433
Printed Date: May 14, 2025 at 1:45 PM

Topic: trunk release Dodge Neon

Posted By: maxcat
Subject: trunk release Dodge Neon
Date Posted: December 01, 2005 at 7:12 PM

Hey All, I am about to start a r/s install on a 2002 DODGE NEON. All looks straight forward but there is some conflicting info on where to find the trunk release wire and what type it is, either reverse polarity or positive pulse. The customer apparently has factory keyless entry,which makes me think getting this wire at the RKE module would be the way to go, however other info says it is found in the drivers kick panel. Can anyone verify the easiest or best place to get to this wire. If i have to get to the RKE module, how tough is this, is there an access panel at the top of the dash to remove , or does the whole top dash have to come off. Any help or insight to this wire would be greatly appreciated.

Thank-you in advance

Replies:

Posted By: cntrylvr79
Date Posted: December 01, 2005 at 7:20 PM

actually it's really easy to get to the keyless module. Yeah the top of the dash has to some off, but it's like 5or 6 screws and popping the a pillars off.

-------------
Cause I'm So white and nerdy...
First Class Certi-fried installer

Posted By: maxcat
Date Posted: December 01, 2005 at 7:42 PM

Thanks cntrytvr79 for the quick reply, if it is that easy i will probably go that route. Do you happen to know what type of feed is required for this wire,ie.positive or reverse polarity. Again thanks for your help.

Posted By: Mike M2
Date Posted: December 01, 2005 at 8:18 PM

I believe it is in the kick panel also, and is 5 wire...

-------------
Mike M2
Tech Manager
CS Dealer Services