hi i just bought the 3300 pro start i had bought the Bulldog remote start and key less but it seemed more complicated too many small pics and i liked the info here
but trying to read this i can figure out most but i stuck on a few things
from the one website i have 2 ignition wires and 2 acc wires, and the bookley for the remote start talks about the yello wire going to now do i add thje extra wire to the ignition or do uj add the wire to the acc connection im not sure.and F (green) wire do i go to the 2nd starter wire or first or one of the acc what should i choose?
also
not sure where to find the tach wire for this car dont wanna look under hood cant get near the coil lol
but for the 12pin harness
i guess i dont need the Arm and disarm output no alarm on car but the
"6 blue/white (-)Aux1 talks about a ground output. do i put that to the ground? or what
and the starter kill do i need that how do i hook that up?
and the purple wire what i do for that one i new to this i can understand if i had better understanding a bit
https://www.directwholesale.net/diagrams/diagram.asp?ModelID=14535&MakeID=54&link=BULLDOG
here is link for my car if anyone can help me better understand id be very happy thank you
Mike
also is there a diagram like for the Prostart 3100 https://www.the12volt.com/downloads/file.asp?ID=280
that be good if i could get picture and i know i read about using a relay for starter kill do i splice into to wire of the ingition or cut it ?and put it directly on the relay
connect the ABCDE normally
on the 7 pin plug use every wire
on the 4 pin plug use only 8 and 9(if you wanna connect the truck you might need a relay)
on the next 4 pin you will need pin 13 for your second ign and second ACC
when connecting...alway splice, the only time you cut a wire is for the starter kill.
where you from in canada?
-------------
Testing is the key
im from near peterborough ontario and u?
ok do i need to install the starter kill is it a good idea? so if i do i cut the wire and resplice between the relay?
and i dont have a 7 pin connector i have a 6 and 5 pin connector no 4 pin plug
so i really dont know how to set up the 5th Relay to which one i plug it into
plus the ground for running whatever that means or where i wire that too
dont think i need relay for trunk its just a push button trunk
comet240 wrote:
im from near peterborough ontario and u?
ok do i need to install the starter kill is it a good idea? so if i do i cut the wire and resplice between the relay?
and i dont have a 7 pin connector i have a 6 and 5 pin connector no 4 pin plug
so i really dont know how to set up the 5th Relay to which one i plug it into
plus the ground for running whatever that means or where i wire that too
dont think i need relay for trunk its just a push button trunk
1- I would not break my head for the starter kill part, it is a 1991, i doubt it they would steal that car(no offence).
2- as for the connectors, https://www.engines911.com/asdocs/CT-3300_wd_en_h370s380v250_040902.pdf
the fifth relay can be used for a second ignition or second acc, as long as the jumper is in the right setting
3- the ground when running will be used on a relay to power up the second ACC(assuming your using the 5relay(green) to power up the sec ignition.
4- and for the trunk release.....the prostart 3300 shoots ground, your car accepts only accepts 12 volts. relay required ...... https://img338.imageshack.us/img338/5905/trunkrelease8cb.png
IF YOU WANT LIVE HELP.....DOWNLOAD WWW.SKYPE.COM AND ADD ME TO YOUR CONTACTS slicksam6166.
I can help you out talking to you...i hate this typing crap...takes to long.
-------------
Testing is the key
lol ok i will add u to skype i already have that program just having problems with a mic so i can type u, ill add u
cuz i not sure about couple things u said about why i need a 2nd ignition or 2nd acc like whats the purpose? etc and the and where u said the prostart shoots ground? cuz i figured i just wire to the side that doesnt have live power on it
ill add u
