Clifford

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=6749
Printed Date: August 21, 2025 at 10:44 PM

Topic: Clifford

Posted By: bigjosh
Subject: Clifford
Date Posted: December 15, 2002 at 10:13 PM

Help, I need to get wiring diagram instructions for my clifford intellivoice iq alarm.. Does any one have this alarm? Is it any good. I am installing it in my 93 olds cutlass supreme SL. Where is the best place to put the motion sensor?

thanks,

joshua

Replies:

Posted By: damon9
Date Posted: December 15, 2002 at 10:25 PM

I don't have one, but the best place for the motion sensor is the center console, sometimes it slips right in, and sometimes you have to take it out all together, make sure there is no metal on the sides of it...

-------------
damon

Posted By: 10nesne1
Date Posted: December 15, 2002 at 10:43 PM

https://www.clifford.com/guides/wiring/intellivoice_iq_wiring.pdf

Posted By: bigjosh
Date Posted: December 18, 2002 at 8:36 PM

thank you very much everyone that is helping me out here!

Posted By: DuTruo
Date Posted: December 30, 2002 at 9:12 PM

yeah i got an intelliVoice IQ, it's pretty basic most of the wires are for accessories , you don't even have to install the small interior speaker that comes with it. go to clifford website and click on owner guide the wiring diagram

-------------
Du Truong

Print Page | Close Window